|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Functional Block Diagram GND 12 Features * * pHEMT GaAs MMIC Die Excellent Cross-Modulation Performance -108 dBm Typ @ Cellular -105 dBm @ PCS Excellent ESD Rating: 300V HBM, 2000V CDM Low Control Voltage Operation to +2.6V High Isolation: 22dB typ at PCS Band Very Low Control Current: 10 A typ Low Insertion Loss: 0.6 dB typ at PCS Band Small Footprint 2.0 x 2.0 mm 12 lead STSLP Package ANT 11 GND 10 9 V3 RF3 GND 1 V1 RF1 2mm GND 2 8 * * * * * * 3 4 5 6 7 GND RF2 2mm V2 Package Paddle should not be grounded for best performance GND leads may be left as N/C with no performance degradation Product Description TriQuint's TQP4M3019 is a high power antenna switch in a single pole three throw (SP3T) configuration. The die utilizes TriQuint's PHEMT MMIC switch process to provide optimized cross-modulation performance for use in CDMA applications. PHEMT Switches are a very low DC current replacement for classic PIN diode based switches. This product is ideally suited to applications where the antenna of a CDMA handset is to be routed to the Cellular duplexer, the PCS duplexer and the GPS receiver input. The design is symmetric and broadband allowing the user to assign cellular, PCS and GPS to ports RF1, RF2 or RF3 as desired. Applications * CDMA Handset Antenna Switch for Cellular, PCS and GPS operation. Package Styles 12ld STSLP GND ANT GND Electrical Specifications Parameter Cellular Insertion Loss GPS Insertion Loss PCS Insertion Loss Cellular Isolation GPS Isolation PCS Isolation Cellular Cross-Modulation2 PCS Cross-Modulation2 Note 2 : Cross-Modulation Test Conditions: 1, 2 Typ 0.50 0.52 0.60 27 24 22 -108 -105 -100 -100 Max Units dB dB dB dB dB dB dBm dBm GND RF3 Min V3 V1 TQP4M3019 STSLP RF1 2mm GND Note 1 : Test Conditions Zo = 50 ohms: Vcontrol =0V/2.6V, Tc=25C. Cellular: PTx1 = 23 dBm @ 836 MHz, PTx2 = 23 dBm @ 837 MHz, Pint = -23 dBm @ 881.5 MHz PCS: PTx1 = 23 dBm @ 1879.5 MHz, PTx2 = 23 dBm @ 1880.5 MHz, Pint = -23 dBm @ 1960 MHz GND RF2 2mm V2 Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 2 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Absolute Maximum Ratings Symbol PIN Max VCTRL TC TSTG Maximum Input Power Control Voltage Case Temperature, Survival Storage Temperature Parameter Absolute Maximum Value +38 +/- 6 -40 to +85 -40 to +150 Units dBm VDC C C Note: The part may not survive all maximums applied simultaneously. Electrical Characteristics1,2 Parameter (all paths ) Cellular Insertion Loss GPS Insertion Loss PCS Insertion Loss Cellular Isolation GPS Isolation PCS Isolation Cellular Cross-Modulation Test Conditions Antenna to Selected Port (824 - 894 MHz) Antenna to Selected RF Port (1574 - 1577 MHz) Antenna to Selected RF Port (1850 - 1990 MHz) RF Off Port to Selected RF On Port (824 - 894 MHz) RF Off Port to Selected RF On Port (1574 - 1577 MHz) RF Off Port to Selected RF On Port (1850 - 1990 MHz) PTx1 = 23 dBm @ 836 MHz, PTx2 = 23 dBm @ 837 MHz, Pint = -23 dBm @ 881.5 MHz PTx1 = 23 dBm @ 1879.5 MHz, PTx2 = 23 dBm @ 1880.5 MHz, Pint = -23 dBm @ 1960 MHz Two tones; +23 dBm each; 837 MHz and 838 MHz Two tones; +23 dBm each; 1880 MHz and 1881 MHz Cellular; @ +25.5 dBm input PCS; @ +24 dBm input Cellular; @ +25.5 dBm input PCS; @ +24 dBm input Cellular PCS 0.5 to 2.0GHz 10% to 90% RF , 90% to 10% RF 50% control to 90% RF, and 50% control to 10% RF Units dB dB dB dB dB dB dBm Min Typ 0.50 0.52 0.60 27 24 22 -108 Max -100 PCS Cross-Modulation Cellular IIP3 PCS IIP3 2 Harmonic 2 Harmonic 3 Harmonic 3 Harmonic P-0.1 dB P-0.1 dB Return Loss Leakage Current Trise, Tfall Ton , Toff rd rd nd nd dBm dBm dBm dBc dBc dBc dBc dBm dBm dB A S S -105 +66 +66 -93 -93 -93 -95 +34 +34.5 -25 10 -100 1 1 Note 1: External DC Blocking capacitors are required at all RF ports. Note 2: Test Conditions Zo = 50 ohms: Vcontrol =0V/2.6V, Tc=25C. Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 3 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Application Example CDMA With GPS Antenna GPS RX LNA GPS LNA PCS TX/RX PCS Duplexer RX PCS PA TX Cell TX/RX SP3T SWITCH Cellular Duplexer LNA RX CELL PA TX V1 V2 V3 Truth Table1,2,3,4,5 V1 1 0 0 V2 0 1 0 V3 0 0 1 ANTRF1 On Off Off ANTRF2 Off On Off ANTRF3 Off Off On Pin Descriptions1,2,3,4,5 Pad Number 1 2 3 4 Pad Name V3 RF3 GND GND 5 5 Description Control RF Port 3 RF Port 3 Ground Ground RF Port 2 Control RF Port 2 Note 1: State 1 = +2.6V; State 0 = 0V Note 2: Differential voltage from State 1 to State 0 must be a minimum of 2.6V Note 3: DC grounding is not required. Control voltages applied to pins 1, 6 and 9 are differential, being 0v and 2.6V nominally. Note 4: The package center paddle is n/c = no connection and not grounded as the preferred user configuration. RF performance figures are quoted with n/c.. Note 5: The package pins 3, 4, 7, 10 and 11 can be n/c or grounded with the same performance. There are no internal connections between these pads and the die. 5 6 7 8 9 10 11 12 RF2 V2 GND 5 Ground RF Port 1 Port Control RF Port 1 RF1 V1 GND 5 Ground ANTENNA Ground ANT GND 5 Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 4 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Typical Performance Insertion Loss and Match (Vcntrl = 2.6 V, T = 25 C) -0.4 Insertion Loss (dB) Isolation (Vcntrl = 2.6 V, T = 25 C) -5 -10 Return Loss (dB) 0 -5 Isolation (dB) -0.5 -0.6 -0.7 -0.8 -0.9 -1.0 0.5 1.0 1.5 2.0 Frequency (GHz) -10 -15 -20 -25 -30 -35 -40 0.5 1.0 1.5 2.0 Frequency (GHz) -15 -20 -25 -30 -35 Low Band Cross Modulation TQP4M3019 at Vcontrol = 2.6 V RF to Antenna PCS Band (T = 25 C) CW interferer = -23 dBm at 881.5 MHz Pin = 23 dBm each at 836 and 837 MHz -85 High Band Cross Modulation TQP4M3019 at Vcontrol = 2.6 V RF to Antenna PCS Band (T = 25 C) CW interferer = -23 dBm at 1960 MHz Pin = 23 dBm each at 1879.5 and 1880.5 MHz -85 Crossmods (dBm) Crossmods (dBm) -90 -95 -100 -105 -110 2.4 2.6 2.8 3.0 3.2 3.4 Control Voltage (V) -90 -95 -100 -105 -110 2.4 2.6 2.8 3.0 3.2 3.4 Control Voltage (V) Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 5 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Demonstration Board Circuit Notes: 1. 2. 3. 4. Package Paddle Should Not be Grounded For Best Performance. See Application Note for Details. GND leads 3, 4, 7, 10 and 12 may be left as N/C with no performance degradation. Control line bypass caps, C2, C5, and C7 should be at least 5 pF and may be larger if needed, depending on the switching time required in the application. See Application Note for details. R1, R2 and R3 are optional pull-down resistors to ensure the "Off" legs of the switch are held to a low enough voltage in circuits using "open collector" style control lines. These lines must be held close to zero volts when the corresponding switch leg is "off" for proper operation of the switch. A nominal control voltage of +2.6V is applied to V1, V2 or V3 corresponding to the "On" leg of the switch, with the other two pins held at nominally 0V. Only one switch leg may be "On" at any time. Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 6 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Application Board Component Locations: See Application Note for additional details including board level losses for de-embedding. Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 7 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Recommended PCB Footprint for 12ld STSLP 2 x 2 x 0.57mm Package Package Paddle Should Not be Grounded For Best Performance PROCEDURE PCB Layout: Leads are to extend away from the pads - these should be the same shape and size to ensure equal solder coverage. Solder mask: The solder mask opening should be offset from the package edges by 250um. Solder stencil: Center pad opening is about 30% of PCB pad size. Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 8 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Part Marking Information: Tape and Reel Information: TBD Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 9 TQP4M3019 Data Sheet SP3T High Power 2.6V 2 x 2 mm CDMA Antenna Switch Packaging and Ordering Information 12 lead STSLP 2 x 2 x 0.57 mm Additional Information 1T This part is compliant with RoHS directive (Restrictions on the Use of Certain Hazardous Substances in Electrical and Electronic Equipment). The part is rated Moisture Sensitivity Level 1 at 260C per JEDEC standard IPC/JEDEC J-STD-020. 1 For latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint: Web: Hwww.triquint.comH Email: info_wireless@tqs.com Tel: (503) 615-9000 Fax: (503) 615-8902 For technical questions and additional information on specific applications: Email: info_wireless@tqs.com The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. TriQuint does not authorize or warrant any TriQuint product for use in life-support devices and/or systems. Copyright (c) 2005 TriQuint Semiconductor, Inc. All rights reserved. Data Sheet: For additional information and latest specifications, see our website: www.triquint.com Revision C, September 7, 2006 10 |
Price & Availability of TQP4M3019 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |